桿件類產品：
包括監控桿、八棱桿、標志桿、龍門架、限高桿、智慧桿、太陽能燈桿，高燈桿、景區桿、河道桿、山頂桿等支持加工定制，廣泛應用于城市管理、交通、能源、景觀、特殊環境等多個領域。
 

產品特點與優勢：
一、卡口監控桿：
監控桿安防監控系統中的核心支撐設備，其設計結合了結構強度、功能性和環境適應性等多重優勢。以下是其核心產品優點及特點的詳細分析：

結構設計與強度優勢

1、外形結構：八棱錐形+圓形+方形等多種外形結構

1.11八邊形錐形設計（上口徑小、下口徑大），相比傳統圓形或方形桿，提供更大的支撐面積和側向剛度，抗風能力達12級以上（36.9米/秒），抗震等級達8級，確保極端天氣下的穩定性。
1.12圓形監控桿：若項目需快速部署、臨時使用，或對安全碰撞、輕量化有高要求（如停車場閘桿、活動安防）。

1.13選方形/八角監控桿：若追求超長壽命（20年+）、高承載擴展性及抗極端天氣能力（如高速卡口、智慧城市主干道）。

1.14兼顧場景：沿海地區優先八角桿防腐抗風；小區景區可選圓桿或定制仿古方桿提升美觀度。

1.15實際選擇需結合預算、設備負載及維護周期—供兩類桿型的深度定制服務，適配復雜需求。

2、高強度材質

主桿選用Q235低碳鋼（壁厚≥4mm，底法蘭≥14mm），無縫鋼管工藝增強抗壓能力；橫臂采用碳鋼管（壁厚3~5mm），兼顧輕量化與承重需求。

精密制造工藝

焊接技術：自動埋弧焊接，焊縫無漏焊、氣孔，通過超聲波探傷檢驗（符合GB/T3323-1987標準）。垂直度控制：安裝后垂直度偏差≤1.0%，保障設備拍攝角度精準。

二、防腐與耐用性

2.多重表面處理

2.1熱鍍鋅層：鋅層厚度≥86μm（國標GB/T13912-2002），經酸洗、鈍化等工序，防腐壽命超30年。

2.2靜電噴塑：表面覆蓋≥100μm塑層（進口塑粉），附著力達GB9286-88 0級，耐候性強，可選配色適應環境。

2.3密封防滲設計

桿體頂端密封防水，過線口優化處理避免割傷線纜，箱體配備防水艙門，防護等級達IP65。

三、功能與安全性

3集成化設備箱

3.1箱體設多向敲落孔，支持上下左右進線；內部配置防雷接地裝置、漏電/短路保護電路，符合電氣安全標準（額定電壓AC220V/380V）。

3.2箱門通過編織軟線連接PE點，形成連續保護電路，防止觸電風險。

3.3靈活擴展性：可同時搭載攝像頭、信號燈、氣象傳感器、LED屏等多種設備，適用于智慧交通、安防監控、環境監測等場景。

3.4便捷維護設計：檢修艙門采用落栓開啟式，維護時無需專用工具；預埋件分體式結構（法蘭盤螺栓連接），簡化運輸與安裝。

四、應用場景與適應性

4.1多環境適用：惡劣氣候：海濱、高濕度地區可選復合材料款（如玻璃纖維桿），抗鹽霧腐蝕。

4.2復雜地形：預埋基礎采用C25混凝土澆筑，地籠結構增強抗拔力，適應沙土、坡地等不穩定地基。

4.3廣泛覆蓋領域：包括城市道路監控、高速卡口、治安卡點、水利監測、機場港口，隧道、橋梁、收費站等，桿高支持6~12米定制，臂長可達12米。

4.4用途： 安裝攝像頭抓拍違章、監測車流、事故取證等。

 

總結：

八棱監控桿通過八棱錐形結構+Q235高強度鋼提升抗風抗震能力，以熱鍍鋅+靜電噴塑實現超長防腐壽命，并借助模塊化箱體、防雷接地、智能擴展接口滿足多功能集成與安全運維需求。其設計兼顧穩定性、耐久性及環境適配性，成為現代智慧城市安防系統的核心基礎設施之一。

 

五．產品形狀、材質與定制規格
5.1產品形狀：圓形/方形/六角/八角/交通信號/八角監控桿  

5.2產品材質：Q235碳鋼/鋁質/201不銹鋼/304不銹鋼
5.3可定制規格：

常規高度或長度：1米/2米/3米/4米/5米/6米/6.5米/7米/8米/9米/10米/12米/15米/18米/20米/30米等

常規口徑：30mm/40mm/50mm/60mm/80mm/120mm/140mm/160mm/180mm/200mm/220mm/240mm/260mm/280mm/300mm/320mm/350mm/400mm/450mm/500mm/800mm/1000mm等

常規厚度：1.0mm/1.2mm/1.5mm/2.5mm/3.0mm/4.0mm/5.0mm/6.0mm/8.0mm/10mm/12mm/14mm/16mm等

根據需方要求產品價格：60元-60萬元/套（含熱鍍鋅噴塑，承重標準）。

 

 

Rod products

Our products include surveillance poles, octagonal poles, sign poles, gantry frames, height limit poles, smart poles, solar lamp poles, high lamp poles, scenic area poles, river poles, mountain top poles, etc. We support processing and customization, and they are widely used in urban management, transportation, energy, landscape, special environments and many other fields.

 

Product features and advantages

一、 Checkpoint Monitoring Pole

The monitoring pole is a core supporting device in the security monitoring system, and its design combines multiple advantages such as structural strength, functionality and environmental adaptability. The following is a detailed analysis of the advantages and features of its core products:

Structural design and strength advantages

1. Shape and structure: Various shapes and structures such as octagonal pyramid, circle, and square

The octagonal conical design (with a smaller upper diameter and a larger lower diameter) provides a larger support area and lateral stiffness compared to traditional circular or square rods. It can withstand wind force of over 12 (36.9 meters per second) and has a seismic resistance rating of 8, ensuring stability in extreme weather conditions.

1.12 Circular surveillance poles: If the project requires rapid deployment, temporary use, or has high requirements for safe collision and lightweight (such as parking lot barrier poles, mobile security).

1.13 Select square/octagonal surveillance poles: If you are looking for an extremely long service life (over 20 years), high load-bearing capacity and expandability, as well as resistance to extreme weather conditions (such as at highway checkpoints and main roads in smart cities).

1.14 Consideration scenarios: Priority is given to octagonal poles for anti-corrosion and wind resistance in coastal areas. For residential areas and scenic spots, round poles or custom-made antique square poles can be chosen to enhance the aesthetic appeal.

1.15 The actual selection should be based on the budget, equipment load and maintenance cycle - providing in-depth customization services for two types of rod types to meet complex demands.

2. High-strength material

The main rod is made of Q235 low-carbon steel (wall thickness ≥4mm, bottom flange ≥14mm), and the seamless steel pipe process enhances the compressive strength. The cross arm is made of carbon steel pipe (with a wall thickness of 3 to 5mm), taking into account both lightweight and load-bearing requirements.

Precision manufacturing process

Welding technology: Automatic submerged arc welding, with no missed welds or pores in the weld seam, and passed ultrasonic flaw detection inspection (in compliance with GB/T3323-1987 standard). Verticality control: After installation, the verticality deviation is ≤1.0%, ensuring accurate shooting angles of the equipment.

二、Anti-corrosion and durability

2. Multiple surface treatments

2.1 Hot-dip galvanized coating: The zinc coating thickness is ≥86μm (national standard GB/T13912-2002). After acid washing, passivation and other processes, the anti-corrosion life exceeds 30 years.

2.2 Electrostatic powder coating: The surface is covered with a ≥100μm plastic layer (imported plastic powder), with adhesion reaching GB9286-88 grade, strong weather resistance, and color matching is available to adapt to the environment.

2.3 Sealing and anti-seepage design

The top of the pole is sealed and waterproof. The cable passage is optimized to prevent cable cuts. The box body is equipped with a waterproof cabin door, and the protection level reaches IP65.

三、Functions and Safety

3 Integrated equipment box

3.1 The box body is equipped with multi-directional knock holes, supporting the entry of wires up, down, left and right. It is internally equipped with lightning protection grounding devices and leakage/short-circuit protection circuits, meeting electrical safety standards (rated voltage AC220V/380V).

3.2 The box door is connected to the PE point through braided flexible wire to form a continuous protection circuit, preventing the risk of electric shock.

3.3 Flexible Scalability: It can be equipped with multiple devices such as cameras, signal lights, meteorological sensors, and LED screens simultaneously, making it suitable for scenarios like smart transportation, security monitoring, and environmental monitoring.

3.4 Convenient maintenance design: The inspection cabin door adopts a bolt opening type, eliminating the need for special tools during maintenance. The split structure of embedded parts (flange and bolt connection) simplifies transportation and installation.

四、Application Scenarios and Adaptability

4.1 Multi-environment applicability: Harsh climate: For coastal and high-humidity areas, composite material models (such as fiberglass rods) can be selected, which are resistant to salt spray corrosion.

4.2 Complex terrain: The embedded foundation is cast with C25 concrete, and the ground cage structure enhances the uplift resistance, adapting to unstable foundations such as sandy soil and sloping land.

4.3 Wide coverage areas: including urban road monitoring, expressway checkpoints, security checkpoints, water conservancy monitoring, airports and ports, tunnels, Bridges, toll stations, etc. The pole height can be customized from 6 to 12 meters, and the arm length can reach 12 meters.

4.4 Uses: Installing cameras to capture traffic violations, monitor traffic flow, and collect evidence of accidents, etc.

Summary

The octagonal monitoring pole enhances its wind and earthquake resistance through an octagonal conical structure and Q235 high-strength steel. It achieves an extremely long anti-corrosion life with hot-dip galvanizing and electrostatic powder coating. Moreover, it meets the requirements of multi-functional integration and safe operation and maintenance with modular boxes, lightning protection grounding, and intelligent expansion interfaces. Its design takes into account stability, durability and environmental adaptability, making it one of the core infrastructures of modern smart city security systems.

五、Product shape, material and custom specifications

5.1 Product Shape: Circular/Square/hexagonal/octagonal/traffic signal/octagonal monitoring pole

5.2 Product Material: Q235 carbon steel/Aluminum /201 stainless steel /304 stainless steel

5.3 Customizable Specifications

Standard heights or lengths: 1 meter /2 meters /3 meters /4 meters /5 meters /6 meters /6.5 meters /7 meters /8 meters /9 meters /10 meters /12 meters /15 meters /18 meters /20 meters /30 meters, etc

Conventional caliber 30mm/40mm/50mm/60mm/80mm/120mm/140mm/160mm/180mm/200mm/220mm/240mm/260mm/280mm/300mm/320mm/350mm/400mm/450mm/500mm/800mm /1000mm, etc

Conventional thickness: 1.0 mm / 1.2 mm / 1.5 mm / 2.5 mm / 3.0 mm / 4.0 mm / 5.0 mm / 6.0 mm / 8.0 mm / 10 mm / 12 mm, 14 mm / 16 mm, etc

According to the requirements of the buyer, the product price is 60 yuan - 600,000 yuan per set (including hot-dip galvanizing and plastic spraying, with load-bearing standards).